Home > Products > Spray Booth > DY-C800 Car Spray Booth

DY-C800 Car Spray Booth
  •  
     
    Inside booth 6900X3900X2650mm (LXWXH)
    Outside 7120X5400X3400mm (LXWXH)
    Metal-base Type 1: 300mm metal-base, complete gratings, four outside ramps
    Type 2: 300mm metal-base, complete gratings, inside inclined ramps
    Type 3: 300mm metal-base, complete gratings, no ramps, base-down
    Type 4: No raised metal-base
    Wall panels  60mm thickness by tongue and groove interlock, 16g EPS insulation
     Double skined by 0.6mm pre-painted steel sheet
    Roof panels  0.8mm galvanized sheet
    Main door  Three-fold flat door: 3000X2600mm(WXH) with pressure lock
     All frames by aluminium alloy
    Service door  One service door: 2000X800mm(HXW) with pressure lock
    Lights  Upper inclined lights,8 units,4X36W each, with specular reflect plate
     Side wall lights, 4 units, 4X36W each, with specular reflect plate
    Air generator
    System
     
    DY-C800A Model DY-C800B Model
     Air intaking: 1X7.5KW turbo fan with Siemens motor,25000m3/h  Air intaking: 2X4KW double-intake centrifugal fan with Siemens motor,25000m3/h
     Air exhausting: 1X7.5KW turbo fan with   Siemens motor,25000m3/h  Air exhausting: 1X7.5KW double-intake centrifugal fan with Siemens motor,25000m3/h
     Frames by aluminium alloy ,double 0.8mm galvanized sheet with rock-wool
     Ductings: 0.8mm galvanized sheet, electrical damper for exhausting
    By-pass  Electric damper from spraying to baking cycle
    Heating  Big heating exchanger by stainless steel, Italian RG5S oil burner,26000kcal/h
    Filter system  P refilter-----600G ceiling filter----- floor paint-stop filter
     M filter and activated carbon extraction filter
    Control system  spraying, heating spraying, bake timer, indicator lights, hour timer, over temperature alarm, emergency stop, pressure gauge, Siemens contactor, Omron temperature controller etc.